基于雷达测量数据的弹箭扰动源最优估计

为精确计算舰载武器的飞行状态参数,以弹体纵向运动过程为研究对象,推导了包含误差干扰源在内的纵向扰动运动学方程,利用"系数冻结法"及拉普拉斯变换得到解析解,拟合出弹体被动段纵向运动的气动参数公式,采用三坐标雷达测量量作为系统量测方程,从而对气动参数误差干扰源进行最优估计。计算结果表明:该算法可以使俯仰操纵力矩系数导数误差的精度稳定在±0.007(°)~(-1)范围内,阻力系数误差的精度趋于±0.025之间;升力系数误差基本稳定在±0.12之间;俯仰力矩系数对攻角的导数偏差精度稳定在±0.011(°)~(-1)之间;俯仰阻尼力矩系数误差的精度收敛于±0.009(°)~(-1)之间,且算法收敛速度快,可为重构高精度的弹道参数提供支撑。     

船载单脉冲雷达快速标校系统设计与实现

当前船载单脉冲雷达幅相一致性标定方法受各类条件的限制,不具备快速标校的特性,一旦设备出现故障或系统更换备件时难以满足系统标校的需求。针对此问题在介绍船载单脉冲雷达幅相一致性标定原理的基础上对传统标校方法进行了分析。基于多模自跟踪体制,建立了天线偏离角与角误差信号关系的数学模型,通过获取目标相对天线角度变化值以及角误差电压变化值,提出了一种幅相一致性快速标定的新方法,并研制了快速标校软件,对设备进行多次标定试验,结果表明标校过程快速简便,满足精度指标,对提高幅相标定效率、克服标定环境局限性等具有重要的现实意义。     

大气损耗对量子干涉雷达的影响机理

以马赫-曾德尔干涉仪作为基本模型对量子干涉雷达的探测原理进行分析,讨论了目标探测过程中光场量子态的具体演化情况,并采用宇称算符作为相位检测算符分析了量子干涉雷达的回波信号,将其与基于振幅检测的经典雷达回波信号进行比较,证明量子干涉雷达具有超越衍射极限的超分辨率特性.此外,针对大气损耗的进一步研究显示:量子干涉雷达分辨率受大气损耗影响较小,且可通过增大脉冲光子数N克服其影响;而量子干涉雷达的灵敏度则受到较大影响,尤其当两路光的损耗情况不同时,灵敏度随N的增加呈现先升高后降低的趋势;当两路光损耗情况相同时,系统灵敏度随N的增加而升高且正比于1/N~(1/2).综上,可根据探测光的大气损耗情况适当调节参考光的衰减来克服大气损耗带来的不良影响.     

Analysis of Electromagnetic Scattering from Plasma Antenna Using CG-FFT Method

A gaseous plasma column as an efficient radiator of electromagnetic waves is well known. This paper presents the scattering analysis of a plasma antenna using the conjugate gradient fast Fourier transform (CG-FFT) method. Radar cross sections (RCS) of designed plasma antenna for different plasma parameters are computed mainly. Numerical results show that the plasma antenna with appropriate parameters can offer lower RCS than the metal one. It is evident from the observed scattering characteristics that the plasma antenna can be regarded as a rod of imperfect conductor with losses.     

A High-Power Reflector Impulse Antenna with Dual-Tem Source

There are different demands on radiation efficiency and direction pattern according to various ultra-wideband (UWB) antennas and high power applications. To obtain more radiating gain on bore-sight of paraboloidal reflector and centralized radiating direction, a novel feeding structure called dual-TEM source has been designed and applied in half-paraboloidal reflector impulse radiating antenna (IRA) applications. Simulation results proved that this proposed half-paraboloidal reflector IRA with dual-TEM source provided greater radiation performance on bore-sight as a result of the synthesized power in the aperture space of paraboloid. Moreover, lots of simulation work and comparison have been done in different feeding models to summarize a relative optimal feeding structure.     

Radar ambiguity function in Lp frame

In modern radar techniques, pulse signal can be replaced by the chirps, which is taken to be signals in Lp space. Wigner's function and ambiguity functions are constructed in an Lp frame and a partial generalization of the uncertainty principle is given by means of the notion of coherent dual.     

A planar subharmonically-pumped 71 GHz receiver with integral feed antenna

A planar, subharmonically-pumped, hybrid millimeter-wave receiver with integral antenna is described. Coplanar waveguide filters are used to isolate the ports and provide image enhancement. The integral planar antenna has 12 dB gain and is suited for use as a feed. The main lobe is normal to the substrate surface. The receiver is designed for an instantaneous bandwidth of 10 GHz. Experiments at 71 GHz indicate single-sideband mixer conversion loss of 6.5 dB. We believe that this represents the highest level of integration yet demonstrated in this frequency range.     

Generation and transmission of the double-sideband optical millimeter-wave with signal carried only by optical carrier

In this paper, we have proposed a new scheme to generate double-sideband (DSB) optical millimeter-wave (mm-wave) with signal carried only by optical carrier, and its transmission performance is investigated. The theoretical and numerical results show that the DSB optical mm-wave signal generated by our scheme suffers only from the fading effect, the time shift of the sidebands has little influence on its transmission performance. The signal demodulated from the harmonic photocurrent shows a clear and open eye diagram and has good performance even if the transmission distance is very close to but not just at the fading nodes. The theoretical results are in good agreement with our numerical simulation.     

Reactive doping of PAni–CSA and its use in microwave absorbing materials

Conductive coatings have been studied for static dissipation and as microwave absorbing materials. The doping process of polyaniline (PAni), which makes it conductive, is an important stage that determines the coating performance. For this purpose, polyaniline was doped by reactive processing in a torque rheometer using different molar ratios between PAni and acid (PAni:CSA) at three different temperatures (80, 90, and 100°C). Aqueous solution doping was also used in the ratio of 1:2 of PAni/CSA, with the aim to investigate the influence of different methods of PAni doping on its characteristics and, consequently, on the performance of coatings. Thermal analyses of the processed materials showed that PAni doped by both routes, reactive and solution processing, showed similar behaviors. X‐ray diffraction analyses showed a semicrystalline structure for the PAni–CSA doped by reactive processing using high CSA concentrations and temperature. It was also observed that the doping process affects the dispersion of the components into the conductive coatings. Microwave absorption measurements (8–12 GHz) of PU‐doped PAni blends showed the dependence of the doping type, the PAni–CSA concentration, and the mixing conditions of the components on the coating performance; it was found up to 99% of attenuation of the incident radiation for some composites in a narrow frequency range. The microwave absorption efficiency of the coating samples prepared by using the reactive doping process indicates the advantage of this methodology over solution doping. Moreover, the reactive process addresses the environmental requirements. Copyright © 2008 John Wiley & Sons, Ltd.     

A hybrid adaptively genetic algorithm for task scheduling problem in the phased array radar

A phased array radar (PAR) is used to detect new targets and update the information of those detected targets. Generally, a large number of tasks need to be performed by a single PAR in a finite time horizon. In order to utilize the limited time and the energy resources, it is necessary to provide an efficient task scheduling algorithm. However, the existing radar task scheduling algorithms can't be utilized to release the full potential of the PAR, because of those disadvantages such as full PAR task structure ignored, only good performance in one aspect considered and just heuristic or the meta-heuristic method utilized. Aiming at above issues, an optimization model for the PAR task scheduling and a hybrid adaptively genetic (HAGA) algorithm are proposed. The model considers the full PAR task structure and integrates multiple principles of task scheduling, so that multi-aspect performance can be guaranteed. The HAGA incorporates the improved GA to explore better solutions while using the heuristic task interleaving algorithm to utilize wait intervals to interleave subtasks and calculate fitness values of individuals in efficient manners. Furthermore, the efficiency and the effectiveness of the HAGA are both improved by adopting chaotic sequences for the population initialization, the elite reservation and the mixed ranking selection, as well as designing the adaptive crossover and the adaptive mutation operators. The simulation results demonstrate that the HAGA possesses merits of global exploration, faster convergence, and robustness compared with three state-of-art algorithms—adaptive GA, hybrid GA and highest priority and earliest deadline first heuristic (HPEDF) algorithm.